DG1280 Digital Hydrophone & Advanced DG Receiver
DG System combines the DG1280 omnidirectional digital hydrophone with the Advanced DG Receiver for passive acoustic monitoring (PAM) in marine environments. The DG1280 captures underwater acoustic signals and transmits them in AES3 digital format; the receiver provides USB Audio Class 2 and Ethernet UDP interfaces, analog outputs and headphone monitoring.
Compared with the analog GP1280, the distinguishing feature is the digital output and integration with the dedicated receiver. The specifications below apply to the DG1280 and Advanced DG Receiver, rather than the GP1280 Standard or GP1280MR versions.
DG System key features
- 24-bit audio with a sampling rate of 192 kHz.
- Omnidirectional hydrophone with a working band from 5 Hz to 90 kHz.
- RJ-45 or coaxial BNC connection; up to 200 m with the BNC option.
- Galvanic isolation between the hydrophone, analog outputs and host computer through dedicated transformers and optocouplers.
- USB Audio Class 2 streaming for acquisition on a PC and in PAMGuard.
- GPS synchronization with NMEA data and PPS pulses embedded in the digital audio stream.
- Ethernet UDP streaming for data acquisition and analysis.
DG1280 digital hydrophone technical specifications
Reference values from the CO.L.MAR. DG System datasheet.
| Parameter | DG1280 |
|---|---|
| Working band | 5 Hz – 90 kHz |
| Preamplifier high-pass filter | 700 Hz (on request) |
| CH1 output sensitivity at 5 kHz | -156 dB re 1 V/µPa |
| CH2 output sensitivity at 5 kHz | -176 dB re 1 V/µPa |
| Directivity | Spherical – Omnidirectional |
| Maximum working depth | 1,000 m |
| Gain at 5 kHz | 46 dB (CH1), 26 dB (CH2) |
| Equivalent input acoustic noise at 5 kHz | 34 dB re 1 µPa/√Hz |
| Input impedance | 10 MΩ |
| Hydrophone supply voltage | 9 – 18 Vdc |
| Current consumption | 100 mA at 12 Vdc |
| Digital output | AES3 protocol |
| Weight in air | 1,600 g |
| Body construction | Marine bronze / PVC |
| Dimensions | 330 × 52 mm |
| Hydrophone connector | Souriau RERM10MT0516 |
| Cable connector, hydrophone side | Souriau PCEF10MT0516A090 |
Advanced DG Receiver: interfaces and connections
The receiver connects the DG1280 to the acquisition system and provides digital outputs, analog outputs and live audio monitoring. The receiver’s 5 V USB-C power supply is distinct from the hydrophone’s specified 9 – 18 Vdc supply range.
| Parameter | Advanced DG Receiver / system |
|---|---|
| Hydrophone input | 1 × RJ-45 / 1 × coaxial BNC, selectable; power option on BNC |
| GPS input | 1 × SMA connector for an active GPS antenna |
| Receiver power supply | USB-C, compatible with standard 5 V power supplies |
| Grounding | Dedicated connector |
| Switches | Hydrophone power routing, RJ-45/BNC source selection and GPS data integration |
| USB data output | USB 2.0, USB Audio Class 2 |
| Ethernet data output | RJ-45, UDP streaming |
| Analog outputs | 2 × BNC: High and Low |
| Live monitoring | Headphone jack with push-button volume control and 5-LED level indicator |
| System audio resolution | 24 bit |
| System sampling rate | 192 kHz |
| Coaxial BNC connection | Digital AES signal and power on the same cable, up to 200 m |
GPS synchronization and analysis software
The internal GPS receiver, connected to an active antenna through the SMA input, embeds NMEA time and position data and Pulse Per Second (PPS) synchronization in the digital audio stream. The dedicated software provides real-time spectrum display, third-octave analysis, sound pressure level (SPL) measurement, event triggering and WAV file recording over Ethernet using the UDP protocol.
DG System applications
- Autonomous acoustic buoys: integration into remote monitoring platforms through Ethernet UDP telemetry.
- Vessel-based PAM: plug and play installation for on-site acoustic measurements.
For full documentation, download the DG1280 and Advanced DG Receiver datasheet (PDF). Explore the range of CO.L.MAR. hydrophones.
DG System – Download












